We have included all the steps in this post to unlock bootloader on LG Stylo 6. Simply, follow this guide and you will end up unlocking the bootloader successfully.
If you get bored with the stock firmware of your smartphone and want to play around with more customization, then you will need to get your device rooted. But you can’t be able to root your device before unlocking the bootloader.
What is Bootloader?
In simple words, a bootloader is a set of instructions that are executed automatically, whenever the device is turned ON. The operating system and Kernel need bootloader instructions to start the boot process and operate the recovery mode.
By default, the bootloader of every smartphone is locked. The reason behind it is very obvious as every manufacturer wants the users to stay with their default provided skin and stock ROMs.
But as we know, Android is open-source and that gives more power and benefits to users to customize their smartphones with endless possibilities. Therefore, Android also provides users an alternate route to get a chance to customize their smartphones.
This process requires many hurdles ahead. It starts with unlocking the bootloader and so on the process continues with rooting and at last, you can end up flashing the custom ROM on your device.
So, we get to know that unlocking bootloader is the permission for users to make different levels of customization from their end.
How To Unlock Bootloader on LG Stylo 6?
- You need to charge your smartphone to at least 70% or above.
- Grab the original USB cable of your smartphone.
- Make a complete back-up of your important data. Note: It will wipe all the data available on your phone storage.
- Download LG Stylo 6 USB Drivers.
- Download ADB and Fastboot tool. Windows and MacOS
Step 1: Enable The Developer Option and OEM Unlock
To enter the process of unlocking, you are required to enable the developer option first and then USB Debugging and OEM unlock.
- Go to Settings on your phone.
- Locate the About Phone and then tap on Build Number several times until the Developer option gets enabled.
- Get back to the main Settings and then tap on Additional Settings->Developer Option.
- In the Developer options, enable OEM Unlocking.
- After that, enable USB Debugging.
Step 2: Unlocking Bootloader on LG Stylo 6
- Download and install LG Stylo 6 USB drivers from the above pre-requisites section.
- Grab the original cable of your smartphone and then connect it to your PC.
- Turn your Phone OFF.
- Now, extract the ADB & Fastboot folder and right-click anywhere in the blank space while holding the shift key to open the command windows or power shell windows.
- Proceed with typing the following command to check whether your smartphone is detected by the computer successfully:
Now, type the following command to enter bootloader mode:
adb reboot bootloader
Now, you will need to get the deviceID with you, to do that, type in the following command:
fastboot oem device-id
- By doing so, you will get a string, simply combine both of the lines containing string and that is actually your Device ID.
- After that, go to official LG Unlock Bootloader and click on "How To Unlock The Bootloader" tab.
- Now, scroll down to the end of the article and click on the "Start Unlocking The Bootloader" button.
- By clicking on it shall direct you to the login page, where you will need to put in your LG account log in credentials.
- After successfully logged in to your account, you will get an approach to "Unlock Bootloader Form".
- Now, fill out the form by putting in the right information.
- Click on the drop down menu labeled as "Phone" and select your LG phone model number.
- Get the IMEI number of your phone which located on the Phone's box or by dialing the number *#06*. After finding, input the IMEI number in the form.
- At last, simply enter the DeviceID and proceed with clicking on the "Confirm" button.
- Once you confirm the process, the "unlock.bin" (by flashing this file will unlock the bootloader on your LG Stylo 6) file will be sent to your registered email address.
- Now, download the "unlock.bin" and move it to the ADB & Fastboot folder that you have extracted and installed before.
- Enter your LG Stylo 6 into Fastboot mode.
In command Prompt, type the following command and press enter to flash the unlock file and unlock the bootloader:
fastboot flash unlock unlock.bin
By executing the above command will unlock the bootloader on your LG Stylo 6.
At the end, execute the following command:
That's it, you have successfully unlocked bootloader on LG Stylo 6.
LG Stylo 6 Specifications
LG Stylo 6 comes with 6.8 inches IPS LCD touchscreen, providing a resolution of 1080 x 2460 pixels.
Moreover, the phone runs on Android 10 powered by an Octa-Core processor.
The internal memory of the phone includes 64 GB paired with 3 GB of RAM and also supports a micro-SD card.
The camera features Triple 13MP + 5MP + 5MP primary lens with LED flash including other features and 13MP secondary lens for selfies.
It is powered by Li-Po 4000 mAh battery. Officially available in White color.
The price of the LG Stylo 6 is about 200 EUR.
How To Boot LG Stylo 6 Into Fastboot Mode
- Turn your Phone Off Completely.
- Now, Press and hold Power, and Volume buttons simultaneously.
- Once, the fastboot interface appears on the screen, release all the buttons.
Now Your Phone is in Fastboot Mode!
I am a tech lover and smartphone enthusiast. I am always keen to know new things about smartphone software’s and hardware’s, So that I can provide solutions to user’s facing different problems.