Guide To Unlock Bootloader on BLU View 3 – (Easy Steps)

We have included all the steps in this post to unlock bootloader on BLU View 3. Simply, follow this guide and you will end up unlocking the bootloader successfully.

If you get bored with the stock firmware of your smartphone and want to play around with more customization, then you will need to get your device rooted. But you can’t be able to root your device before unlocking the bootloader.

unlock bootloader

What is Bootloader?

In simple words, a bootloader is a set of instructions that are executed automatically, whenever the device is turned ON. The operating system and Kernel need bootloader instructions to start the boot process and operate the recovery mode.

By default, the bootloader of every smartphone is locked. The reason behind it is very obvious as every manufacturer wants the users to stay with their default provided skin and stock ROMs.

But as we know, Android is open-source and that gives more power and benefits to users to customize their smartphones with endless possibilities. Therefore, Android also provides users an alternate route to get a chance to customize their smartphones.

This process requires many hurdles ahead. It starts with unlocking the bootloader and so on the process continues with rooting and at last you can end up flashing the custom ROM on your device.

So, we get to know that unlocking bootloader is the permission for users to make different levels of customization from their end.

Benefits of Unlocking Bootloader
  • Gaining the root access
  • Allows to flash custom recovery
  • Installing different custom ROMs

Disadvantages
  • This process may void the phone warranty
  • The performance of your phone might also get affected
  • The process might brick your phone, if anything goes wrong
  • Might become a reason for disturbing the security of your smartphone
  • You might also lose the data available on your phone storage.

How To Unlock Bootloader on BLU View 3?

BLU View 3 unlock bootloader

Pre-Requisites

  • You need to charge your smartphone to at least 70% or above.
  • Grab the original USB cable of your smartphone.
  • Make a complete back-up of your important data. Note: It will wipe all the data available on your phone storage.
  • Download BLU View 3 USB Drivers.
  • Download ADB and Fastboot tool. Windows and MacOS

Step 1: Enable The Developer Option and OEM Unlock

To enter the process of unlocking, you are required to enable the developer option first and then USB Debugging and OEM unlock.

  • Go to settings on your phone.
  • Locate the About Phone and then tap on Build Number several times until the Developer option gets enabled.
enable-developer-option
  • Get back to the main Settings and then tap on Additional Settings->Developer Option.
  • In the Developers option, enable OEM Unlocking.
enable-oem-unlocking
  • After that, enable USB Debugging.
enable-usb-debugging

Step 2: Unlocking Bootloader on BLU View 3

  • Download and install BLU View 3 USB drivers from the above pre-requisites section.
  • Grab the original cable of your smartphone and then connect it to your PC.
  • Turn your phone OFF Completely.
  • Now, extract the ADB & Fastboot folder and right-click anywhere in the blank space while holding the shift key to open the command windows or power shell windows.
adb fastboot folder

Proceed with typing the following command to check whether your smartphone is detected by the computer successfully:

adb devices

Now, type the following command to enter bootloader mode:

adb reboot bootloader

To unlock the bootloader, type in the following command and press enter:

fastboot flashing unlock

If the above command does'not execute successfully, then you can try the following command

fastboot OEM unlock

  • After that, you will get the confirmation message, just proceed with Yes to unlock the bootloader.
  • At last, reboot your smartphone by typing the following command to let your smartphone enter into unlocked bootloader state.

fastboot reboot

That's it, you have successfully unlocked bootloader on BLU View 3.

BLU View 3 Specifications

BLU View 3 unlock bootloader

BLU View 3 comes with 6.0 inches IPS LCD touchscreen display, providing a resolution of 720 x 1440 pixels.

Moreover, the phone runs on Android 11 powered by an Octa-Core 2.0 GHz Cortex-A53 processor.

The internal memory of the phone includes 32 GB paired with 3 GB of RAM and also support micro-SD card.

The camera features 13MP primary lens with LED flash and 8MP secondary lens for selfies.

It is powered by Li-Po 3400 mAh battery. Officially available in Black color.

How To Boot BLU View 3 Into Fastboot Mode?

  • Turn your Phone Off Completely.
  • Now, press and hold Volume Up, Volume Down, and Power buttons simultaneously.
  • When the new window appears on the screen, simply release all the buttons.
  • Meanwhile, press the Volume Down button.

Now Your BLU View 3 is in Fastboot Mode!

How To Boot BLU View 3 Into Recovery Mode?

  • Turn your Phone Off Completely by pressing the power button for a while.
  • Once It turned OFF. Now, press and hold Volume Up, Volume Down, and Power buttons simultaneously.
  • When the new Windows appear on screen, release all the buttons.
  • Next, press the Volume Up button to select the Recovery Mode.
  • After that, tap on the Power button to display Recovery Mode Menu.

Now Your BLU View 3 is in Recovery Mode!

  • Use the below buttons in recovery mode:
  1. Volume Buttons: To navigate between different options.
  2. Menu Button: To select the option.