Steps To Unlock Bootloader on Motorola Droid Turbo 2

We have included all the steps in this post to unlock bootloader on Motorola Droid Turbo 2. Simply, follow this guide and you will end up unlocking the bootloader successfully.

If you get bored with the stock firmware of your smartphone and want to play around with more customization, then you will need to get your device rooted. But you can’t be able to root your device before unlocking the bootloader.

unlock bootloader

What is Bootloader?

In simple words, a bootloader is a set of instructions that are executed automatically, whenever the device is turned ON. The operating system and Kernel need bootloader instructions to start the boot process and operate the recovery mode.

By default, the bootloader of every smartphone is locked. The reason behind it is very obvious as every manufacturer wants the users to stay with their default provided skin and stock ROMs.

But as we know, Android is open-source and that gives more power and benefits to users to customize their smartphones with endless possibilities.

Therefore, Android also provides users an alternate route to customize their smartphones.

Benefits of Unlocking Bootloader
  • Gaining the root access
  • Allows to flash custom recovery
  • Installing different custom ROMs

Disadvantages
  • This process may void the phone warranty
  • The performance of your phone might also get affected
  • The process might brick your phone, if anything goes wrong
  • Might become a reason for disturbing the security of your smartphone
  • You might also lose the data available on your phone storage.

How To Unlock Bootloader on Motorola Droid Turbo 2?

Motorola Droid Turbo 2 unlock bootloader

Pre-Requisites

  • You need to charge your smartphone to at least 70% or above.
  • Grab the original USB cable of your smartphone.
  • Make a complete back-up of your important data. Note: It will wipe all the data available on your phone storage.
  • Download Motorola Droid Turbo 2 USB Drivers.
  • Download ADB and Fastboot tool. Windows and MacOS

Step 1: Enable The Developer Option and OEM Unlock

To enter the process of unlocking, you are required to enable the developer option first and then USB Debugging and OEM unlock.

  • Go to Settings on your phone.
  • Locate the About Phone and then tap on Build Number several times until the Developer option gets enabled.
enable-developer-option
  • Get back to the main Settings and then tap on Additional Settings->Developer Option.
  • In the Developer options, enable OEM Unlocking.
enable-oem-unlocking
  • After that, enable USB Debugging.
enable-usb-debugging

Step 2: Unlocking Bootloader on Motorola Droid Turbo 2

  • Download and install Motorola Droid Turbo 2 USB drivers from the above pre-requisites section.
  • Turn your Phone OFF.
  • Grab the original cable of your smartphone and then connect it to your PC.
  • Boot your phone into Fastboot Mode.
  • Now, extract the ADB & Fastboot folder and right-click anywhere in the blank space while holding the shift key to open the command windows or power shell windows.
  • Proceed with typing the following command to check whether your smartphone is detected by the computer successfully:

adb devices

Click "OK" if it asks to allow USB Debugging after typing the above command. Now, type the following command to enter into bootloader mode:

adb reboot bootloader

After executing the above command, you will enter into bootloader, simply confirm that your device bootloader is locked. Now, type the following command to check whether the fastboot drivers are installed or not.

fastboot devices

It will show your device serial number or else you shall re-install the drivers to get your device into the list.

After your device is connected successfully, enter into bootloader mode by simply selecting and tapping on the "Boot To Download" mode by using the Volume and Power keys.

Now, type the following command and press enter to execute:

fastboot oem get_unlock_data

By executing the above command, you will get a string, simply combine the string into one line by removing the spaces.

After that, go to the official Motorola Unlock Bootloader page and sign in with your registered Motorola account account that is linked to your smartphone.

Now, just copy and paste the string into the box and click on the button below "Can My Device Be Unlocked?".

By clicking on it shall send you an email with the Unlock Key.

Simply, copy the unlock key from the email, you just received and paste it with the command below:

fastboot oem unlock UNLOCK_KEY

Here, you will need to paste the key in the place of UNLOCK_KEY. Press enter to execute the command and wait for the process to complete.

That's it, you have successfully unlocked the bootloader on the Motorola Droid Turbo 2.

At the end, execute the following command:

fastboot reboot

The above command will reboot your phone and after the bootup, your device bootloader will be unlocked.

How To Boot Motorola Droid Turbo 2 Into Fastboot Mode

  • Turn your Phone Off Completely.
  • Now, Press and hold Volume Down, and Power buttons simultaneously.
  • Once, the fastboot interface appears on the screen, release all the buttons.

Now Your Phone is in Fastboot Mode!